Connected devices that collect data in the field, send it on and bring it to your screen.
You talk to the engineer directly · reply within 24 hours · 150+ devices in the field
You want to see a machine’s temperature, a tank’s fill level or the humidity in a greenhouse from somewhere else. That takes a board, an enclosure, a connection and software all working together.
We design all of it end to end: the board that reads the sensor, the link that carries the data, the server that collects it and the dashboard you look at. Our earthquake early warning network, DS Mini and DS Pro, was built exactly this way.
We choose the right sensor for what you want to measure and design the board that reads and processes it.
We pick the right link for the site: LoRa, Wi-Fi, Bluetooth or wired.
We set up the server that collects the data, live charts and alarms when a threshold is crossed.
We plan the enclosure, mounting and power supply for the environment the device will live in.
We make it possible to monitor devices, change settings and update firmware remotely.
Our own products and things we built for clients.
DS Mini detects the seismic wave; DS Pro builds its own communication network in the field. Board, firmware, LoRa radio and server side are all ours, with more than 150 devices deployed.
See the productA PLC-controlled test device that checks how products withstand rain, splashing water and water jets under standard conditions. Mechanics, control cabinet and software from one team.
Automation serviceA 4-relay GSM controller that switches a field water pump from a phone, with run confirmation, power-outage alerts and schedules. Board, enclosure and app are ours.
See the productShort steps and an early prototype instead of long proposals. At the end of each step we look at what is ready together.
We listen to what you want to build: on the phone, on a video call or at the workshop.
We plan the circuit, board, enclosure and firmware, and pin down the scope.
We build the first device in our workshop, bring it up on the bench and test it.
We try the device in real conditions and fix what the feedback shows.
Production-ready files, installation and firmware updates afterwards.
The person on the phone is the person designing your board. No middlemen, no sales team.
Founder · Electronics and embedded firmware engineer
Electrical and electronics engineer. Previously developed vehicle diagnostic device firmware for a US company; that firmware runs on more than 7,000 production units. At Fung IoT he owns circuit and board design, firmware and communication.
Mechanical and production engineer
Mechanical design, enclosures and assembly, production readiness. He manages the step from prototype to series production and the field installation, so the device works in the factory, not just on the bench.
In most cases, yes. We can add external sensors to the machine or take signals from its existing control system. We will tell you which way fits once we have seen the machine.
Yes. With LoRa, devices can send data to a gateway kilometres away without internet; only one point needs to be online.
Yes. Data is shown on a web dashboard that opens on a phone, tablet or computer, and notifications can be sent when a threshold is crossed.
We design a custom electronic board for your need, prepare it for production and write its firmware.
We link devices in the field across kilometres, with no SIM card, subscription or internet needed.
PLC-controlled machines, custom test rigs and automation for existing machines.
Message us on WhatsApp or use the form; we reply the same working day and set a time to talk. A rough sketch, a half-finished prototype or a problem on the production line nobody has solved yet: all good starting points.
